Svantek UK

Sound Intensity Probe SIS 190 0.5″

Due to its two-channel technology the Sound Intensity Probe makes it possible not only to measure sound pressure levels, but also to record the sound pressure gradient which is needed to calculate the sound intensity.

Microtech Gefell


For more information on Sound Intensity Probe SIS 190 0.5″ or to request a quote, contact our team now:

Request a QuoteContact us

The sound intensity probe consists of one Measuring Microphone Capsules Pair MK 290 E (2x MK 222 E) with matched phase response and frequency response. Due to the use of two 1/4” Measuring Microphone Preamplifiers MV 310, sound field distortions (shadowing and diffractions) are minimal. The distance between both microphones is defined by spacers (12 mm, 50 mm). These enable measurements in a frequency range between 35 Hz and 5 kHz.

The quality of conformance between both measuring microphone capsules with regard to their transforming functions is measured in compliance with IEC 1043 and documented as Minimum pressure-residual intensity index for probes. Each microphone capsule pair comes with a measuring protocol.

Pre-amplifier MV 310
Current consumption 2 to 10 mA
Transducer excitation voltage 24 to 30 V DC
Frequency range 20 Hz to 100 kHz
Range of tolerance RL=100k; Ce=3.3nF; Ce=22pF ±0.1 dB
Gain RL=100k; Ce=22pF -1.0 dB @ 5 Hz
RL=100k; Ce=22pF -0.5 dB @ 1 kHz
RL=100k; Ce=22pF -0.7 dB @ 10 kHz
Input impedance 10 GOhm; <0.4 pF
Output impedance <100 Ohm
Inherent noise A-weighted; RL=100k; Ce=22pF 1.7 µVrms
linear 20Hz to 20 kHz; RL=100k; Ce=22pF 4,2 µVrms
Plug MALCO-Microdot; 10-32 UNF-2A
Microphone capsule MK 290 E
Polarization voltage 0 V
Frequency range 35 Hz to 5 kHz
Open-circuit Sensitivity 50 mV/Pa
Max. SPL ≤ 3% THD at 1 kHz 146 dB
Inherent noise A-weighted 16 dB


Find out everything you need to know about the Voyager from Microflown in this informative product leaflet: